Integral Blade Stabilizers

STABILIZERS

PARVEEN’s Stabilizers are designed to control hole deviation, prevent differential sticking and minimize dogleg severity and thus provide optimum drill bit’s performance. For ordering stabilizers, PARVEEN recommends the following rib outside diameters. Upto 10” diameter – 1/32” under hole size. Upto 15” diameter – 1/16” under hole size. Over 15” diameter – 3/32” under hole size. Most stabilizers loose their stability effect when diameter loss reaches 1/8” to 3/16”. At this stage, the stabilizer is recommended for replacement.

PARVEEN’S INTEGRAL BLADE STABILIZERS

PARVEEN’s Integral blades stabilizers are designed with thru hard faced spiral ribs and are available both as string or near bit. Stabilizers in standard design are of right hand spirals. Even configuration for left hand spirals can be provided.While in open spirals, the three ribs form a wall contact surface of 132 degree & 95 degree (in straight hole drilling), in the tight spirals, the three ribs form a wall contact surface of 360 degree and 260 degree thus ensuring drill string centralization in deviated holes.