Bottom Pack-Off Cross Over Seal

The standard bottom pack – off is type ‘PBP1’

The bottom pack – off is installed in the lower flange of the casing head spool and tubing head spool to prevent the lower flange from being exposed to high pressure.

The bottom pack-off type ‘PBP1’ seals the annulus pressure by injecting packing. The bottom pack – off PBP – 2 is designed to give a positive annular seal with pressure energized oversize O – Rings.

For services at working pressures above 5,000 psi, the ‘PP’ seal is used.

When the bottom pack – off is used, the casing should be cut 90 mm from the top flange surface of the connecting spool.