English
Russian
SpanishThe PARVEEN Model BKR Lite Bridge Plug is a wireline set, medium pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K-1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. This plug will not vent gas pressure prior to plug moving unless provisions are made. Available in 4-1/2″ thru 13-3/8″ casing sizes.
The PARVEEN Model BKR-1 Premium Bridge Plug is a wireline set, high pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K-1 type setting sleeves and tension mandrels. It has a Model BKR Cement Retainer body and a BKR-1 Bridge Plug bottom. It can be set on any Baker Wireline Pressure Setting Tool or on pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. It can also be converted and run on a Baker K-1 Mechanical Setting Tool. This plug will not vent gas pressure prior to plug moving unless provisions are made. Available in 4-1/2″ thru 13-3/8″ casing sizes.
The PARVEEN Model BKR-1 Lite Bridge Plug is a wireline set, medium pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K-1 type setting sleeves and tension mandrels. It has a Model BKR Cement Retainer body and a BKR-1 Bridge Plug bottom. It can be set on any Baker Wireline Pressure Setting Tool or on pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. It can also be converted and run on a Baker K-1 Mechanical Setting Tool. This plug will not vent gas pressure prior to plug moving unless provisions are made. Available in 4-1/2″ thru 13-3/8″ casing sizes.
The PARVEEN Model A Premium Bridge Plug is a wireline set, high pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. It can be set on any GO or Baker type wireline pressure setting tool or pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. Available in 2-3/8″ thru 20″ tubing/casing sizes.
The PARVEEN Model A Lite Bridge Plug is a wireline set, medium pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. It can be set on any GO or Baker type wireline pressure setting tool or pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. Available in 2-3/8″ thru 7″ tubing/casing sizes.
The PARVEEN Model BKR Premium Bridge Plug is a wireline set, high pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K-1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. This plug will not vent gas pressure prior to plug moving unless provisions are made. Available in 4-1/2″ thru 13-3/8″ casing sizes.
PARVEEN MODEL A PREMIUM BRIDGE PLUG – WIRELINE SET / DRILLABLE
The PARVEEN Model A Premium Bridge Plug is a high pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. It can be set on any GO or Baker type wireline pressure setting tool or pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. The packing elements are contained by rocker action back-up rings that eliminate extrusion of the elements at high temperatures and pressures. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal. One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. Optional packing systems of Viton or Aflas are available on special order. Special application tools can be custom designed to fit your specific needs.
