Model BKR Lite Bridge Plug – Wireline Set / Drillable

Features

• Drillable cast iron construction
• Uses Bolt, Elder or Baker K-1 Setting Sleeves
• Wireline set on Baker Type Wireline Pressure Setting Tool
• Hydraulic set on PARVEEN Hydraulic Setting Tool
• Small ODs for extra clearance in heavy viscous fluids
• One-piece slips set in premium grade casings including P-110
• Multi-Durometer packing system
• For temporary or permanent service

The PARVEEN Model BKR Lite Bridge Plug is a medium pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K-1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/coil tubing with an PARVEEN Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal. One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. It is also good in horizontal applications because there are no back-up rings. Optional packing systems of Viton or Aflas are available on special order. This plug will not vent gas pressure prior to plug moving unless provisions are made. Special application tools can be custom designed to fit your specific needs.

Specification Guide